Your Numerical Model Begins at the Site Investigation � Phase Improving the Suitability of Numerical Geotechnical Modeling
The success of an advanced geotechnical numerical analysis depends foremost on a thorough geologic and geotechnical understanding of the site, and thus the geometric definition and adequacy of input parameters...
Megaproject Monitoring by Satellite ? InSAR-based Settlement-time History: Measuring Hundreds of Thousands of Points, Several Times a Month, Across an Entire City
Satellite-based interferometric synthetic aperture radar, or InSAR, has gained unequivocal importance as a routine and precise monitoring method for large and small areas alike. Historical datasets allow...
Risk in Geotechnical Practice: Geotechnical Judgment
People use judgment in every aspect of their lives. We rely on our judgments to make decisions that can have consequences from small to large on ourselves and on others, sometimes with life-threatening...
Advanced Data Analytics In Geotechnics: Adapting to the Big Data Era
Everyone is talking about the impact of artificial intelligence (AI) on the future of work. In one camp are people like the industrialist Elon Musk who fear the potential evils of AI and its possible impact...
Tsunami Loads and Effects
Guide to the Tsunami Design Provisions of ASCE 7-16
The devastating tsunamis that struck Chile and Japan in 2010 and 2011 underscored the critical need for new structural design criteria to improve building resilience and safeguard human life. They also...
Poison Oak, Mistakes, and Lessons
When things go wrong in geotechnicalengineering ? like ground movements andearthwork construction delays ? failureinvestigations are often performed. In a typical geotechnical project, the path is relatively...
ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering
The journal will meet the needs of the researchers and engineers to address risk, disaster and failure-related challenges due to many sources and types of uncertainty in planning, design, analysis, construction,...
Calibration of Jackup Leg Foundation Model Using Full-Scale Structural Measurements
The fitness of jack-up rigs to operate in varying water depths and weather conditions is determined by "site-specific" structural assessments. These assessments are conducted by a wide range of companies...
Introduction
The purpose of this white paper is to: foster understanding and transparency of analytical methods necessary to update and describe climate, including possible changes in the frequency...
Review of Climate Science for Engineering Practice
Weather and climate are a factor in civil engineering design and practice. Weather is defined as the state of the atmosphere with respect to wind, temperature, cloudiness, moisture, pressure,...
Loading, Geometry, and Analysis
This Standard applies to latticed steel transmission structures. These structures shall be either self-supporting or guyed. They consist of hot-rolled or cold-formed prismatic members...
Dynamic Shearing Properties Of Compacted Clay
A series of 116 Q-type triaxial compression tests was performed using specimens of Goose Lake clay compacted at water contents ranging from 9 percent dry of optimum to 3 percent on the...
Estimation of Consolidation Properties of Clay from Field Observations
Analyses to obtain theoretical time-settlement curves for embankments typically make use of soil properties measured in the laboratory on small disturbed samples subject to strain rates...
Failure of a Large Circular Excavation
A circular excavation, 117 feet (36 m) in diameter by 90 feet (27 m) deep, was designed by an experienced engineering firm and construction was performed by an experienced contractor....
Failure of a Twenty-Foot High Retaining Wall
A cantilever retaining wall, designed in apparent accord with provisions in a civil engineering handbook, failed soon after construction. Analyses of the causes of the failure are presented....
Effective Stress Theory of Soil Compaction
The shape of the moisture-density curve obtained from compaction tests has been explained in terms of capillarity and lubrication, viscous water, and physico-chemical interactions. None...
Finite Difference Analyses for Sand Drain Problems
The geotechnical literature contains a number of papers in which sand drain installations are described and field performance is compared with theoretical predictions. Some of the field...
Design and Installation of Auger Steel Catenary Risers
The Auger export pipelines are connected to the TLP by steel catenary risers (SCRs). This is believed to be the first time steel pipe has been used for catenary risers. SCRs offer advantages...
Geo-Shanghai 2014
Proceedings of the Geo-Shanghai 2014 International Conference, held in Shanghai, China, May 26-28, 2014. Sponsored by the Geo-Institute of ASCE. These...
Is There a Movement Toward Three-dimensional Slope Stability Analyses?
Over the past few years, interest in performing three-dimensional (3-D) slope stability analyses has surged. An increasing number of research papers on this topic are being published at...
Return to search